CHEVY CAMARO 1LE PLASTIC FRONT WHEEL WIND DEFLECTOR

CHEVY CAMARO PLASTIC FRONT WHEEL WIND DEFLECTOR 2014

THESE ARE CUSTOM CNC FRONT WHEEL DEFLECTOR FOR THE VERY FRONT OF THE FRONT FENDER. THESE SIMPLY ATTACH USING THE FASTENER SUPPLIED INTO THE FENDER AND DOUBLE SIDED TAPE. THEY WILL HELP PUSH AIR AWAY FROM THE FRONT TIRES.

TO INSTALL THE DIFFUSER SIMPLY USE AND ALCOHOL SWAB TO WIPE ANY WAX AND TAR OFF OF THE INNER FENDER LIP AND WIPE DOWN THE DEFLECTOR, REMOVE THE 3 TORX FASTENERS IN THE LOWER FENDER AND POSTITION THE DEFLECTOR IN THE DESIRED PLACE NOTING THE TOP OF THE DEFLECTOR. REMOVE THE DEFLECTOR AND INSTALL THE DOUBLE SIDED TAPE ABOUT 1/2" FROM WHERE THE TOP OF THE DIFFUSER WAS ON THE FEDER LIP. REINSTALL THE THE DEFLECTOR STARTING WITH THE SUPPLIED FASTNERS AND SPACERS PRESSING FIRMLY AGAINST THE SPLASH GUARD TILL IT HAS BONDED WITH THE DOUBLE SIDED TAPE.

*** NOTE ***

THE DOUBLE SIDED TAPE CAN ONLY BE USED ONE AND ONCE IT IS ATTACHED WILL NOT COME LOOSE UNLESS TORE APART. CAMARO NOT INCLUDED, SHOWN IN CARBON ON SS 1LE CAMARO.

MADE FROM PLASTIC SHEETS

*** INCLUDED WITH ITEM ***

2 - DEFLECTOR
6 - FASTENERS AND SPACERS
DOUBLE SIDED TAPE
ALCHOL SWABS

MADE IN USA